Set Static IP Address on Ubuntu 22.04 Command Line

Ubuntu set static ip address using command line; Through this tutorial, we will learn how to set static ip address on linux ubuntu 22.04 system using command line or prompt.

Ubuntu Set Static IP Address Using Command Line

Use the following steps to set static ip address using command line; is as follows:

Step 1 – Check device name
Step 2 – Create a Static connection
Step 3 – Add DNS IP to static-ip
Step 4 – Activate the Static connection
Step 5 – Verify the IP assignment to the selected device

Step 1 – Check device name

First of all open terminal or command line to check device name by using the following command:

nmcli connection show

The given output shows that our device name is “emp0s3”:

Step 2 – Create a Static connection

Use the following command to create a new static connection named “static ip” for the “emp0s3” device:

$ sudo nmcli con add type ethernet con-name 'static-ip' ifname emp0s3 ipv4.method manual ipv4.addresses 192.168.1.102/24 gw4 192.168.1.1

Step 3 – Add DNS IP to static-ip

Execute the following command to add the DNS IP to the “static-ip” connection:

sudo nmcli con mod static-ip ipv4.dns 192.168.1.1

Step 4 – Activate the Static connection

Execute the following command on command lien to active “static-ip” connection:

sudo nmcli con up id 'static-ip'

Step 5 – Verify the IP assignment to the selected device

Now, execute the “ip” command with the “a” option to validate the IP assigned to the “enp0s3” device:

ip a

Then, verify the internet connectivity with the help of the following “ping” command:

 ping google.com

Conclusion

Through this tutorial, we have learned how to set a static IP address on Linux ubuntu 22.04 system using the command line or prompt.